JLS series screw lock wall machine, is the production of non-load bearing wall of light within the non-prestressed planks special equipment. Machine with ordinary Portland cement as gelling agent, the use of fly ash, coal gangue, pumice, shale, industrial waste, ceramic, perlite and other materials as aggregate, to the vertical structural random cloth REINFORCEMENT (8 ∮ 1 .6-5mm low carbon steel wire), in the long-term pedestal complete the wall panels continuous production. Widely used in a variety of building and frame structure interior space separation wall construction and so on. Low cost, light weight and construction, ease of installation and so on.
    
   The construction industry on the wall of the earthquake resistance is essential. In developed countries strongly advocated the development of wallboard wall, block wall requirement on the chain. Spiral lock wall machines produced by spiral lock wall, in addition to all the wall with the strengths of home and abroad, but also has wall panels and wall panels, wall panels and the wall as a whole lock function, greatly improving the integrity of the wall, is conducive to seismic walls, lateral pressure, has greatly improved and the prevention of wall deformation resulting from construction such as cracking common problem.
Wall light wall with a light, thin plates and other advantages, than block and brick buildings reduce the total load of 6% of the total cost savings of around 7% in every 100 square meters of building area can increase the use of an area of 5% - 8% or so.

Technical parameters:
   Type: JLS9 × 60 JLS12 × 60
   Thickness (cm) 9 12
   Width (cm) 60 60
   Hole number (a) 75
   Aperture (mm) 54 82
   Forming Speed: (m / min) 0.8 ~ 1.1
   Dimensions: (mm) 2360 × 1030 × 724 2387 × 1129 × 746
   Machine mass: (kg) 1030 1180

Its advanced and innovative as follows:
  1, using a unique spiral lock Mortise Match-process, thus improving after installation of the wallboard joints crack problem;
  Second, siding installation and construction using infusion technology, construction, high efficiency, saving time and labor;
  Third, the upper and lower wall joints slot random shape pedestal strip joints without having to install, can save project investment, lower production costs;
  Fourth, both laid on the following layers of reinforced random (8 ∮ 2mm or less), but also in the pedestal below the pre-Zhang one way or another layer of steel bars (8 ∮ 2 - 5mm thick bars), reaching a multi-purpose machines;
  5, is to optimize the machine structure design, spiral reamer feeding a balanced, squeezing.